If silicone products are used in industry or machinery, they often appear as accessories. At this time, relevant assembly needs to be done. In assembly, some details are often overlooked because they are too simple, resulting in abnormal operation and failure. Application, Dongguan Huayuan, who is a silicone product factory today, will introduce the precautions when assembling silicone products.
First of all, the first point is to know the position of the assembly, and be sure to clean the position to be installed before assembly and keep it clean. needs to be dealt with. Moreover, it is necessary to roughly check whether the size is too consistent in appearance. For example, a round thing needs to be equipped with a silicone fitting, then the outer surface of the silicone fitting must also be round, otherwise it will seriously affect the appearance. If you ignore this Steps, then the subsequent discovery will affect the progress of the work, so a cursory look is necessary.
Step 2: In terms of size, like some seals, the size requirements are very strict, because silicone seals are generally used for waterproofing, anti-leakage, etc., so when you get silicone products, you must first measure whether the size is correct, and The position that needs to be assembled must also be measured. It does not mean that the place that needs to be assembled must be correct. This step is also the most easily overlooked place when people install silicone products. It must be the problem of silicone products. In fact, this is also related to the relevant steps before design and production. The second installation method is mainly about the required amount of silicone parts and the size of the place to be assembled!
Step 3: Be careful when installing, and don't let anything go wrong. This is also a problem that is easy to make mistakes. Generally, assembly lines will be used for production, and there will be many people on the assembly line. Individual actions and thinking are different, so it is easy to have problems, which requires everyone to work together to do things. Every assembled product needs to be carefully observed to see if the assembly is in place, and whether the silicone parts are being assembled. Excessive force will cause deformation, and whether the color of the silicone product is the same as that of the product.
